LG Unlock Instructions

———- Instructions ———-

Read This First – Before Unlocking

– DO NOT use all attempts to enter the unlock code otherwise your phone will be hardlocked. Most newer phones have as little as only THREE attempts.

If you only received ONE Unlock Code above, don’t worry about this part, use the code provided above.

If you only received MULTIPLE Unlock Code above, please see below:

You will receive the codes in this format:

NCK=xxxxxxxxxxxxxxxxNSCK=xxxxxxxxxxxxxxxxSPCK=xxxxxxxxxxxxxxxxCPCK=xxxxxxxxxxxxxxxxSIMCK=xxxxxxxxxxxxxxxx

Most carriers use the “NCK” code, please try this first. If it doesn’t work, please try the “SPCK” next.

DO NOT USE THE SAME CODE MORE THAN ONCE. Only try the NCK or the SPCK code, DO NOT USE ANY OF THE OTHER CODES.

HINT: If your phone is asking for Network PIN, it’s most likely the NCK. If it’s asking for the Service Provider PIN, it’s most likely the SPCK.

———- Code Input Instructions ———-

How to enter unlock codes on all LG Models

Different phones have different unlock code input instructions, Try the following instructions in order:

Most LG Phones:

Method #1 Insert a non accepted simcard, and enter code when prompted for a code

Newer LG phones (ie. Optimus L70, L90, etc):

Method #2 Go to the dial screen and press “2945#*model number#”

Example: If your phone is the D415 (Optimus L90), the model number to use above is 415. The complete dial method would be: 2945#*415#

Older LG phones (these steps may not work on older devices):

Method #3 to the dial screen and press 2945#*71001# as if making a call, enter code when prompted.

Method #4 Go to the dial screen and press *#865625# as if making a call, enter code when prompted.

If Phone says, “Code Accepted” or “Network Unlock Successful” or “Not Yet Personalized” your phone is fully unlocked

*If you are not receiving any signal after unlocking, make sure your wireless connections are turned on after unlocking the phone. Also pull the battery and restart phone.

If your device has a T-Mobile/MetroPCS unlocking app.

1. Once we email you that your device is “Unlocked/Success” Open the app and select “Permanent Unlock”.
2. Your device’s IMEI number is now registered as “Eligible” to be Unlocked in T-mobile System.
3. Your device will reboot and you can use your T-Mobile device on other Carriers.

Input your new sim card and make a test call

I can make calls and text but I’m not getting Internet Service.

In this case you will need to adjust what’s called the APN settings.  The APN settings vary depending on the service provider you are trying to use.  Please contact your service provider and they can assist you setting this up.  There is no separate unlock for data or internet.  If you can call or text, your phone’s network is fully unlocked.

My phone is asking for the “PUK” or “Security Pin” or “Password”.

If your phone is asking for one of the above, it is the Simcard personal password or phone security password NOT the Network Lock which we provide for you.  You can contact your service provider for this.  Once you bypass this, you can use the Network Unlock Code provided by us.
My phone seems to be unlocked but I’m not getting any signal.

First of all, we do request you contact the service provider to make sure after unlocking your device, your unlocked phone will be compatible on their network.  Not all GSM phones are compatible with any Network after unlocking it.  The unlocked phone must be able to support the Network’s Frequency.  If you are unsure of this, please contact them regading this.

After unlocking your phone, please pull the battery for a couple minutes and then restart the device.  It may take a few minutes for your phone to pick up the new signal. Also go to your Network settings on your phone, and make sure the device can detect the signal from the simcard you are trying use.

How to Unlock LG (most models):

1. Insert not-allowed SIM card
2. Power on the handset- phone will display “phone restricted”
3. Select “Cancel” – phone will display “phone restriction code”
4. Enter the SIM unlock code
5. Select “OK” – the handset is now successfully unlocked

How to Unlock LG Phoenix p505

1. As if making a call press *#865625#
2. Click “unlock usim”
3. Click “unlock network”
4. Enter code, press OK
5.  the handset is now successfully unlocked

How to Unlock LG E720 (Optimus chic)
1. Insert the NOT ALLOWED sim card.
2. On the keypad, type: ” 2945#*720# ”
3. The screen will then ask to enter the network code, enter the given NCK code.
4. Press unlock
5. And the cell phone is unlocked.

How to Unlock LG myTouch Q c800

1. As if making a call press 2945#*800#
2. Click “Network”
3. Click “unlock network”
4. Enter code, press OK
5.  the handset is now successfully unlocked

How to Unlock LG Doubleplay

1. As if making a call press 2945#*279#
2. Click “Network”
3. Click “unlock network”
4. Enter code, press OK
5.  the handset is now successfully unlocked

How to Unlock LG e900h

1. Enter a non accepted simcard
2. Phone will ask from “sim pin”
3. Enter unlock code provided
4.  press OK
5.  the handset is now successfully unlocked

How to Unlock LG Pop GD510

1. As if making a call press 2945#*510#
2. Click “unlock usim”
3. Click “unlock network”
4. Enter code, press OK
5.  the handset is now successfully unlocked

How to Unlock LG Loop GT540

1. As if making a call press 2945#*540#
2. Click “unlock usim”
3. Click “unlock network”
4. Enter code, press OK
5.  the handset is now successfully unlocked

Unlock Instruction for LG p509 Optimus T

1. Power ON your phone with not allowed sim card (one that didn’t come with the phone)
2. Type 2945#*509#
3. The phone will ask you to input the unlock code twice, just input the NCK code
4. Device is now unlocked

Unlock Instruction for LG p500h Optimus T

1. Power ON your phone with not allowed sim card (one that didn’t come with the phone)
2. Type 2945#*500#

3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked

Unlock Instruction for LG Quantum

1. Turn on your phone with a non accepted SIM card
2. Phone will display “Phone Restricted”.
3. Select “Cancel” and the LG phone will display “phone restriction code”.
4. Now, enter your LG unlock code.
5. Select OK and your mobile should be unlocked!

Unlock Instruction for LG GT505

1. Power ON your phone with no simcard
2. Type *2945#505#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked

Unlock Instruction for LG KP500 Cookieor KP501 Cookie 

1. Power ON your phone with no simcard
2. Type 2945#*71001#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked

Unlock Instruction for LG TU720 (SHINE) and VU

1. Power ON your phone with not allowed sim card (one that didn’t come with the phone)
2. Type *#865625#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked

How to Unlock LG gw620 unlock

1. Insert original sim card and turn phone on.
2. Enter 2945#*620#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete

How to Unlock LG GS170

1. Turn on phone without SIM card
2. Enter 2945#*71001#
3. Choose unlock, press OK
4. Enter unlock code and press OK and phone is unlocked!

How to Unlock LG KG800 or TG800 Chocolate:

1. With the phone in standby, enter 2945#*7101#. This will activate the extra menu.
2. Go to: Settings > Security > SimLock > Network
3. Select deactivate. Enter the unlock code

Fido LG GW300 Gossip

1. Power on your LG GW300 with the original SIM card in.
2. Enter 2945#*300#
3. A menu will pop up, select SIM Unlock.
4. Enter your unlock code and hit OK.
5. Your LG GW300 may automatically reboot and should now be unlocked!

or

1.power phone ON without SIM
2.type 2945#*71001# to enter unlock menu
3. enter unlock code or codes

OR

1. Insert not-allowed SIM card
2. Power on the handset- phone will display “phone restricted”
3. Select “Cancel” – phone will display “phone restriction code”
4. Enter the SIM unlock code
5. Select “OK” – the handset is now successfully unlocked

LG GR500 Xenon

1. Insert not-allowed SIM card
2. Power on the handset- phone will display “phone restricted”
3. Select “Cancel” – phone will display “phone restriction code”
4. Enter the SIM unlock code
5. Select “OK” – the handset is now successfully unlocked

OR

1. insert original sim card and turn phone on.
2. Enter 2945#*9701#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

OR

1. After turning on your mobile phone, press: *#865625#
2. Press Yes to continue.
3. Enter the 16 digit Subsidy Unlock Code
4. Enter the 16 digit Subsidy Unlock Code, again.
5. Device should say: “Network Lock Deactivated”
6. Phone may automatically reboot

How to Unlock LG GS290 Cookie

with an original simcard

type 2945#*290# and insert NCK code

LG GS505 Sentio Unlocking Instructions

1. Turn on your LG GS505 Sentio with original SIM card
2. Enter 2945#*505#
3. A menu will pop up, select SIM unlock
4. Enter your unlock code and press OK
5. The phone will then reboot and your LG GS505 Sentio is unlocked!

How to Unlock LG GT350 Town

1. Power on your phone with the original SIM card or no simcard
2. Enter 2945#*350#
3. A menu will pop up, select SIM Unlock, DO NOT select NETWORK unlock.
4. Enter your unlock code and hit OK.
5. Your phone will reboot and is unlocked!

How to Unlock LG C710h

1. Power on your phone with the original SIM card or no simcard
2. Enter 2945#*710#
3. A menu will pop up, select SIM Unlock, DO NOT select NETWORK unlock.
4. Enter your unlock code and hit OK.
5. Your phone will reboot and is unlocked!

How to Unlock LG C2000:

1. Insert non-Cingular SIM card
2. Power on the handset – phone will display “phone restricted”
3. Select “Cancel” – phone will display “phone restriction code”
4. Enter the SIM Unlock code
5. Select “OK” – the handset is now successfully unlocked

How to Enter Unlock Codes on LG F2250:

1. With allowed sim card in the start menu type: 2945#*3311#.
2. Handset shows saved, then return to startup screen
3. Press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show ‘Enter NCK’
4. Enter your unlock code and OK.

How to Enter Unlock Codes on LG U8150:

1. Switch ON your phone with a not allowed SIM card.
2. Compose: 277634#*#.
3. Go to menu “SIM Lock”.
4. Enter the unlock code

How to Enter Unlock Codes on LG U8110:

1. With a not allowed sim card in your phone enter Pin code then validate, type: 277634#*#
2. Select ‘Sim Unlock’ menu #
3. Enter NCK code then validate
4. Your phone is now unlocked.

How to Enter Unlock Codes on LG U8210:

1. With a not allowed sim card enter Pin code then validate, type: 277634#*#
2. Shows test menu
3. Choose sim test menu and type: 2945#*#, choose Sim Unlock menu
4. Handset shows ‘Enter NCK’
5. Enter code, then hit OK.

How to Enter Unlock Codes on LG U81xx:

1. To bring up the unlock menu on the phone with a SIM card, type 2945#*88110#
2. Enter the code

In case you need to reset the phone without a SIM card first, type 277634#*# or 47328545454#.

How to Enter Unlock Codes on Cingular AT&T LG CU500:

1. Insert non-Cingular SIM card.
2. Power on the handset. Phone will display “Invalid SmartChip”
3. (IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
4. In Idle screen, enter 159753#*#. Phone will display “Enter NCK, Remaining 5
5. Enter the 8 digit SIM unlock code
6. Select “OK”. The handset is now successfully unlocked.

Unlock Instructions for LG KU990 (Viewty):

1. insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*990#
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete.

Unlock Instructions for LG KF600:

1. insert original sim card and turn phone on.
2. Enter 2945#*71001#
3. A menu will pop up to enter the sim unlock code
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

Unlock Instructions for LG KF750 aka LG SECRET:

1. Insert original sim card and turn phone on.
2. Enter 2945#*750#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete

Unlock Instructions for LG CU915:

1. Power ON your phone with an accepted SIM card.
2. Type *#865625#CODE
3. Press OK
4. Device is now unlocked

How to Enter Unlock Codes on LG Incite CT810:

1. Dial this into the LG Incite’s phone menu
2. 2945#*810#
3. Press CALL.
4. It should you ask you for the code.

How to Enter Unlock Codes on LG Invision CB630:

1. Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2. Dial this into the LG Incite’s phone menu
3. *#865625#
4. Press CALL.
5. It should you ask you for the code.

How to Enter Unlock Codes on all other LG cell phones:

1. Switch ON your phone with an allowed SIM card
2. Then compose:

2945#*5101# –  (if you have a LG 510w)
1945#*5101# –  (if you have a LG 1200 & B1200)
2945#*5221# –  (if you have a LG 5200 & 52200)
2945#*5301# –  (if you have a LG 5300)
2945#*5401# –  (if you have a LG 5400)
2945#*70001# – (if you have a LG 7020)
2945#*7101# –  (if you have a LG 7100)
2945#*1201# or 2945#*70001# – (if you have a LG 1100)
2945#*70001# –  (if you have a LG7250T)
2945#*2201# –  (if you have a LG C2200)
2945#*5301# –  (if you have a LG T5100)
2945#*3311# –  (if you have a LG C3310)

3. Go to “Menu” and then to “Settings”
4. Then select “Security”
5. To finish select “Network Provider” and select “Deactivate”
6. Enter the unlock code
7. If your cell phone is not listed, please follow instructions for LG C2000 above

How to Enter Unlock Codes on LG KE970 Shine:

1. Switch ON your phone with an allowed SIM card
2. Then compose: 2945#*9701#
3. Press CALL.
4. It should you ask you for the code.

How to Enter Unlock Codes on CU575 / Trax and CU515

1. Put a non cingular sim in the phone ,phone says invalid smart chip

2. Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code

How to Enter Unlock Codes on CU500

1. Turn on phone with non-accepted SIM card
2. It will say on the screen “invalid smartcard”
3. Enter 159753#*#, it will bring you to the next screen
4. Enter your unlock code and press OK.

Here’s how to unlock the EVE GW620R:

Unlock Instruction for LG GW620R
1) Power ON your phone with SIM Card that the phone is locked to
2) Type 2945*#620#UNLOCK CODE
3) Press OK
4) Device is now unlocked

Here’s how to unlock the TU330 

1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. SIM unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed

Services